The P1EFD fault code in automobiles indicates a problem with the battery charger system. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue could be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

It is important to address this issue promptly as it can lead to further damage to the vehicle’s electrical system. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

It is crucial to interpret the fault code accurately to ensure the correct repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1efd fault code. Here are the symptoms to look out for:

  • The P1EFD fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, poor acceleration, and increased emissions.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1EFD automobile fault code can be caused by a faulty battery charger, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1EFD can be caused by a faulty battery charger.
  • It can also be caused by an open or shorted battery charger harness.
  • Additionally, a poor electrical connection in the battery charger circuit can also trigger this fault code.

To fix the automobile fault code p1efd, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1efd, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1EFD is related to the hybrid battery pack coolant pump. The symptoms include a warning light on the dashboard and reduced performance.

The cause is a malfunction in the coolant pump circuit.

The estimated repair time is 1.0 hour, and the cost can range from $75 to $150 per hour. The fixing cost may also include the cost of replacement parts, which can vary depending on the make and model of the vehicle.

It is important to address this issue promptly to avoid further damage to the hybrid battery pack.

The P1EFD code is related to the battery charger power efficiency in hybrid and electric vehicles.

The battery charger has a self-diagnostic system that detects any fault condition. The hybridEV powertrain control module 2 receives the diagnostic and system status information from the battery charger through serial data. The P1EFD code is used to indicate a problem with the battery charger’s power efficiency.

The hybridEV powertrain control module 2 is responsible for hosting the DTC information related to this fault code.

What are the possible causes of the P1EFD automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1EFD fault code. This code is usually caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the P1EFD fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the P1EFD fault code, it may be caused by a faulty Battery Charger, open or shorted Battery Charger harness, or poor electrical connection in the Battery Charger circuit. To fix this issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What should I look for when checking for damaged components and connector pins related to the P1EFD fault code?

If you’re experiencing the P1EFD fault code, which is indicated by the engine light or service engine soon warning light turning on, you should check for a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, visually inspect the wiring harness and connectors, and check for damaged components. Look for broken, bent, pushed out, or corroded connector pins.

p1efd error fault code explained

If your engine light is on, it could be due to a faulty battery charger, open or shorted harness, or poor electrical connection.

Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top