The P1ED9 automobile fault code indicates a problem with the battery charger system. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code could be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

It is important to address this issue promptly as it can lead to battery failure and other electrical problems.

The repair process involves visually inspecting the wiring harness and connectors for damage and checking for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1ed9 fault code.

Here are the symptoms to look out for:

  • The P1ED9 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1ED9 fault code can be caused by a faulty battery charger, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1ED9 can be caused by a faulty battery charger.
  • It can also be caused by an open or shorted battery charger harness.
  • Additionally, a poor electrical connection in the battery charger circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1ed9, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1ED9, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1ED9 is a common issue in automobiles.

The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is dependent on the repair time.

Most auto repair shops charge between $75 and $150 per hour.

Therefore, the cost of fixing the P1ED9 fault code can range from $75 to $150.

It is important to consider the repair time and the hourly rate when estimating the cost of fixing this fault code.

The P1ED9 fault code is related to the battery charger in hybridEV vehicles. The battery charger diagnoses its own systems and communicates with the powertrain control module through serial data.

This DTC is for internal measurements that verify the charger is performing properly. The P1ED9 code specifically indicates an issue with the battery charger converter input voltage sensor 1 circuit having low voltage.

The battery charger measures internal voltages, currents, and temperatures and verifies they are within the proper range.

What are the possible causes of the P1ED9 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1ED9 fault code. This code is usually caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the P1ED9 fault code?

If you’re experiencing the P1ED9 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can visually inspect the related wiring harness and connectors to identify the issue. The possible causes of this fault code include a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix the issue, check the possible causes listed above and visually inspect the wiring harness and connectors for any damaged components or broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components and connector pins related to the P1ED9 fault code?

If you’re experiencing the P1ED9 fault code, which is indicated by the engine light or service engine soon warning light turning on, you should check for a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, visually inspect the wiring harness and connectors, and check for damaged components. Look for broken, bent, pushed out, or corroded connector pins.

p1ed9 error fault code explained

If your engine light is on, it could be due to a faulty battery charger, open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top