The P1EC4 fault code in automobiles indicates a problem with the Battery Energy Control Module. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.

The cause of this fault code could be a faulty Battery Energy Control Module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can lead to reduced fuel efficiency and other problems. The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion.

The difficulty level of this repair is moderate, and it takes approximately 1.0 hour to fix. To interpret the fault code, one needs to check the “Possible Causes” listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1ec4 fault code. Here are the symptoms to look out for:

  • The P1EC4 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and the speedometer may not function correctly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P1EC4 fault code can be caused by a faulty module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1EC4 can be caused by a faulty Battery Energy Control Module.
  • It can also be caused by an open or shorted Battery Energy Control Module harness.
  • Additionally, a poor electrical connection in the Battery Energy Control Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1ec4, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1ec4, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1EC4 has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P1EC4 will range between $75 and $150, depending on the repair time required.

The P1EC4 code refers to a problem with the hybridEV battery pack heater transistor. The hybridEV battery contains 5 high voltage contactors and 2 transistors.

The high voltage contactors and transistors allow the high voltage DC batteries to be connected to the vehicle or safely contain the high voltage DC within the hybridEV battery assembly.

The 2 transistors consist of the precharge transistor and heater transistor. The contactors and transistors close and open in a specific sequence controlled by the hybridEV powertrain control module 2. The hybridEV powertrain control module 2 supplies voltage to the control circuit for the high voltage contactorstransistors.

Ground is provided through the case ground.

What are the possible causes of the P1EC4 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1EC4 fault code. This code is caused by a faulty Battery Energy Control Module, an open or shorted harness, or poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1EC4 fault code?

If you’re experiencing the P1EC4 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The cause of this issue could be a faulty Battery Energy Control Module, an open or shorted harness, or a poor electrical connection. To address this problem, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components that one should look for when fixing the P1EC4 fault code?

If you’re dealing with the P1EC4 fault code, keep an eye out for the engine light turning on. This could indicate a problem with the Battery Energy Control Module, such as an open or shorted harness or poor electrical connection. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

p1ec4 error fault code explained

If your engine light is on, it could be due to a faulty Battery Energy Control Module or related wiring issues.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.

Scroll to Top