If you see the engine light on or the service engine soon warning light, it could be due to the P1E97 fault code.
This code indicates a problem with the HybridEV Battery Interface Control Module, which could be faulty or have a poor electrical connection.
The harness may also be open or shorted. It’s important to address this issue as soon as possible to prevent further damage to your vehicle.
The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion.
To interpret the fault code, you can use an OBD-II scanner or take your vehicle to a mechanic.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E97: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e97 fault code. Here are the symptoms to look out for:
- The P1E97 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1E97: What Triggers This Fault Code?
P1E97 fault code can be caused by various issues, including a faulty control module or poor electrical connection.
- The automobile fault code P1E97 can be caused by a faulty Hybrid/EV Battery Interface Control Module.
- It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
- Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.
Fix Code P1E97: Simple Steps To Get Your Car Running
To fix the p1e97 automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code P1E97, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1E97: Affordable Fix For Complex Automobiles
The fault code P1E97 is a common issue in automobiles.
The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour.
Therefore, the cost of fixing the P1E97 fault code can range from $75 to $150.
It is important to consider the repair time when estimating the cost of fixing this fault code.
P1E97: Your Car’s Battery Is In Trouble
The P1E97 fault code is related to the hybrid battery interface control module 2. This fault code is triggered when the module detects a fault condition within its own internal microprocessor integrity. It is important to note that this fault is internal to the module and does not involve any external circuits.
The P1E97 fault code specifically refers to the long-term memory performance of the hybridEV battery interface control module 2.
FAQ
If you’re experiencing the P1E97 fault code in your automobile, it’s likely that your engine light is on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or a poor electrical connection in the circuit. To fix the issue, it’s recommended to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If the engine light is on due to a faulty Hybrid/EV Battery Interface Control Module, it is important to visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This can help identify if the Hybrid/EV Battery Interface Control Module harness is open or shorted, or if there is a poor electrical connection in the circuit. Checking for these issues can help fix the problem and resolve the engine light issue.
Ignoring the P1E97 fault code in an automobile can lead to serious consequences. The engine light will remain on, indicating a problem with the Hybrid/EV Battery Interface Control Module. This fault code is caused by a faulty module, open or shorted harness, or poor electrical connection. To fix the issue, one must visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. Ignoring this fault code can lead to further damage to the vehicle’s electrical system and may result in costly repairs.
Wrap Up
If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module or related wiring issues. To fix it, visually inspect the wiring harness and connectors for damage or corrosion and check for broken or bent pins.
