The P1E88 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. It is crucial to address this issue promptly as it can lead to further damage to the vehicle.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is moderate, and it takes approximately 1.0 hour to fix. It is essential to interpret the fault code correctly to identify the root cause of the problem and avoid any further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of p1e88 fault code. Here are the symptoms to look out for:

  • The P1E88 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting problems, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1E88 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1E88 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1E88 fault code.

To fix the p1e88 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code P1E88, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1E88 is a common issue in automobiles. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code varies between $75 and $150 per hour, depending on the auto repair shop.

The cost may also vary based on the severity of the issue and the type of vehicle.

It is important to get this fault code fixed as soon as possible to avoid any further damage to the vehicle.

The P1E88 code is related to the HybridElectric Vehicle Battery 93 Circuit. The battery pack contains 288 cells grouped in parallel and series.

There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.

All components related to the battery energy control module are serviceable.

What are the possible causes of the P1E88 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1E88 fault code. This code is caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1E88 fault code?

If you’re experiencing the P1E88 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the P1E88 fault code and not fixing it in time?

Ignoring the P1E88 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light will remain on, and the vehicle may experience reduced performance, decreased fuel efficiency, and even complete failure. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components to avoid further damage.

p1e88 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module.

Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top