The P1E85 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module.
The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The importance of repairing this issue lies in the fact that it can affect the performance and efficiency of the vehicle.
The difficulty level of the repair is moderate, and it can take up to 1.0 hour to fix.
To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
It is crucial to interpret the fault code correctly to ensure the proper repair of the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E85: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON, it could be a sign of p1e85 fault code.
Here are the symptoms to look out for:
- The P1E85 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1E85: Common Causes Of Fault Code
P1E85 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E85 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of the P1E85 fault code.
Fix Code P1E85: Simple Steps To Get Your Car Running
To fix the p1e85 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code P1E85, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1E85: Affordable Fix For Complex Automobile Fault Code
The automobile fault code P1E85 has an estimated repair time of 1.0 hour. The cost of fixing this fault code varies depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour. These factors are influential in determining the overall cost of diagnosing and fixing the P1E85 fault code.
P1E85: Understanding Your Hybrid Battery’s Health
The P1E85 fault code is related to the HybridElectric Vehicle battery pack.
The battery pack contains 288 cells grouped in parallel and series. There are three battery sections, each with a different number of cells and cell groups. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.
The P1E85 code specifically refers to a circuit issue in battery section one, which contains the first 90 cells30 cell groups.
The battery energy control module will detect and communicate any fault conditions to the hybridEV powertrain control module 2.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E85 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E85 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1E85 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light will remain on, and the vehicle may experience reduced performance, decreased fuel efficiency, and even complete failure. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components to avoid further damage and costly repairs.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins.
Inspect the components listed above to fix the issue.
