The P1E6A fault code in automobiles indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code is a faulty battery pack or control module.
The repair is of utmost importance as it affects the performance of the vehicle.
The repair difficulty is moderate, and the repair time is estimated to be around 1.0 hour.
To fix the issue, one needs to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
P1E6A: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e6a fault code.
Here are the symptoms to look out for:
- The P1E6A fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience transmission shifting issues, and there may be a noticeable decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P1E6A: Common Causes & Fixes
The P1E6A fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E6A can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of this particular fault code.
Fix Code P1E6A: Simple Steps To Get Your Car Running
To fix the p1e6a automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p1e6a, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1E6A Fixing Cost And Complexity
The fault code P1E6A is a common issue in automobiles.
The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is dependent on the repair time. Most auto repair shops charge between $75 and $150 per hour.
Therefore, the cost of fixing the P1E6A fault code can range from $75 to $150. It is important to consider the repair time and the hourly rate when estimating the cost of fixing this fault code.
P1E6A: Your Car’s Battery Is In Trouble
The P1E6A code refers to a fault in the HybridElectric Vehicle Battery 63 Circuit.
The battery pack contains 288 cells grouped in parallel and series.
There are three battery sections, each with a different number of cells and cell groups. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E6A fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E6A fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.
If you encounter the P1E6A fault code with the symptom of the engine light being on, you should check for a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, visually inspect the related wiring harness and connectors. Look for broken, bent, pushed out, or corroded connector’s pins and check for any damaged components.
![p1e6a error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/06/P1E6A-error-fault-code.jpg)
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.