The P1E60 fault code in automobiles indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue is often due to a faulty battery pack or control module.
Repairing this problem is important as it can affect the performance and efficiency of the vehicle. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix. To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E60: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e60 fault code. Here are the symptoms to look out for:
- The P1E60 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, reduced engine power, poor acceleration, rough idling, stalling, decreased fuel efficiency, and difficulty starting the engine.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1E60: Common Causes Of This Fault Code
The P1E60 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E60 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of the P1E60 fault code.
Fix Code P1E60: Simple Steps To Get Your Car Running
Below are some possible fixes for the automobile fault code p1e60, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P1E60, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1E60: Affordable Fix For Your Car
The automobile fault code P1E60 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of P1E60 will range between $75 and $150, depending on the repair time required.
P1E60: Your Car’s Battery Needs Attention
The P1E60 code refers to a fault in the HybridElectric Vehicle Battery 53 Circuit.
The battery pack contains 288 cells grouped in parallel and series. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.
The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.
The hybridEV powertrain control module 2 is responsible for diagnostic trouble code information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E60 fault code. This code is caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E60 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1E60 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s battery system. This can result in reduced fuel efficiency, decreased power, and potential damage to other components. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module.
Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.
