The P1E5C automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. It is crucial to address this issue promptly as it can lead to further damage to the vehicle.
The repair difficulty is moderate, and the repair time is estimated at 1.0. To fix the issue, one must visually inspect the wiring harness and connectors for any damage or corrosion. It is also recommended to check for broken, bent, or pushed out connector pins.
Understanding the fault code is essential to ensure the proper repair of the vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Decoding P1E5C: Uncovering Symptoms Of Auto Trouble
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e5c fault code. Here are the symptoms to look out for:
- The P1E5C fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P1E5C: Common Causes & Fixes
The P1E5C fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E5C can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of this particular fault code.
Fix Code P1E5C: Simple Steps To Get Your Car Running
To fix the p1e5c automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code p1e5c, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1E5C Repair Cost & Complexity
The fault code P1E5C is a common issue in automobiles. The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is dependent on the repair time.
Most auto repair shops charge between $75 and $150 per hour.
Therefore, the cost of fixing the P1E5C fault code can range from $75 to $150.
It is important to consider the repair time and the hourly rate when estimating the cost of fixing this fault code.
P1E5C: Understanding Your Car’s Brake Pressure Sensor Fault
The P1E5C code refers to a fault in the HybridElectric Vehicle Battery 49 Circuit. The battery pack contains 288 cells grouped in parallel and series. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.
The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.
The hybridEV powertrain control module 2 is responsible for diagnostic trouble code information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E5C fault code. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E5C fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.
If you encounter the P1E5C fault code with the symptom of the engine light being on, you should check for the possible causes of a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
![p1e5c error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/06/P1E5C-error-fault-code.jpg)
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.