The P1E59 fault code in automobiles indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.
The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue is often due to a faulty battery pack or control module.
Repairing this problem is important as it can affect the performance of the vehicle. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix. To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E59: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e59 fault code. Here are the symptoms to look out for:
- The P1E59 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience transmission shifting issues, and the driver may notice a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P1E59: Common Culprits Of The Fault Code
The P1E59 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E59 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of this particular fault code.
Fix Code P1E59: Simple Steps To Get Your Car Running
To fix the p1e59 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code P1E59, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1E59 Repair Cost & Complexity
The factors that influence the cost of diagnosing and fixing the automobile fault code P1E59 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour. The cost of auto repair shops varies, but it is common for them to charge between $75 and $150 per hour.
These factors should be considered when estimating the total cost of diagnosing and fixing the P1E59 fault code.
P1E59: Your Car’s Battery Is In Trouble
The P1E59 code refers to a fault in the HybridElectric Vehicle Battery 46 Circuit. The battery pack contains 288 cells grouped in parallel and series.
There are three battery sections, each with a different number of cells and cell groups. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.
The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.
All components related to the battery energy control module are serviceable.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E59 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E59 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1E59 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light will remain on, and the vehicle may experience reduced performance, decreased fuel efficiency, and even complete failure. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components to avoid further damage and costly repairs.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.
