The P1E24 automobile fault code indicates a problem with the Auxiliary Transmission Fluid Pump Motor Control Module.
This can cause the engine light to turn on, indicating a need for service. The cause of this fault code could be a faulty control module, an open or shorted harness, or a poor electrical connection.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated at 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle.
To interpret the fault code, it is recommended to check the possible causes listed above and inspect the related components thoroughly.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E24: Uncovering The Symptoms Of This Auto Fault Code
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1e24 fault code.
Here are the symptoms to look out for:
- The P1E24 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1E24: Common Causes Of This Fault Code
P1E24 fault code can be caused by a faulty motor control module or poor electrical connection.
- The automobile fault code P1E24 can be caused by a faulty Auxiliary Transmission Fluid Pump Motor Control Module.
- It can also be caused by an open or shorted Auxiliary Transmission Fluid Pump Motor Control Module harness.
- Additionally, a poor electrical connection in the Auxiliary Transmission Fluid Pump Motor Control Module circuit can also trigger this fault code.
Fix Code P1E24: Simple Steps To Get Your Car Running
To fix the p1e24 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code P1E24, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1E24 Fixing Cost & Complexity
The factors that influence the cost of diagnosing and fixing the P1E24 automobile fault code are: – The estimated repair time is 1.0 hour. – Auto repair shops typically charge between $75 and $150 per hour. – The cost may vary depending on the location and reputation of the repair shop.
– The cost may also depend on the severity of the issue causing the fault code.
– The cost may include the price of replacement parts if needed.
P1E24: The Low Voltage Saga Of Your Car’s Hybrid System
The P1E24 fault code is related to the auxiliary transmission fluid pump control module. It is an internal fault detection, which means that the modules listed below are internal to the power inverter module and are not serviced separately. These faults are handled inside the hybrid powertrain control module, and no external circuits are involved.
The code specifically refers to the long-term memory performance of the auxiliary transmission fluid pump control module.
FAQ
If you’re experiencing the P1E24 fault code, your engine light may be on. This could be due to a faulty Auxiliary Transmission Fluid Pump Motor Control Module, an open or shorted harness, or poor electrical connection in the module circuit. To fix this issue, inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the P1E24 fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to fix it. Firstly, check the possible causes, which include a faulty auxiliary transmission fluid pump motor control module, an open or shorted harness, or a poor electrical connection. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
If you’re dealing with a P1E24 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The issue is likely caused by a faulty Auxiliary Transmission Fluid Pump Motor Control Module or an open or shorted harness. To fix it, inspect the wiring harness and connectors for any damage, such as broken, bent, pushed out, or corroded pins.
Wrap Up
If your engine light is on, it could be due to a faulty Auxiliary Transmission Fluid Pump Motor Control Module or related wiring issues.
Check for damaged components and inspect the wiring harness and connectors for any issues.
