The P1E1B automobile fault code indicates a problem with the Power Inverter Module, which can cause the engine light to turn on. The cause of this issue can be a faulty module, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can affect the performance of the vehicle. The repair difficulty is moderate, and it is recommended to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time is estimated to be around 1.0 hour.

To interpret the fault code, it is necessary to use an OBD-II scanner or code reader.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1e1b fault code. Here are the symptoms to look out for:

  • The P1E1B fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The P1E1B automobile fault code can be caused by various issues, including problems with the power inverter module and its connections.

  • The automobile fault code P1E1B can be caused by several factors.
  • These include a faulty Program Power Inverter Module, a malfunctioning Power Inverter Module, an open or shorted Power Inverter Module harness, and a poor electrical connection in the Power Inverter Module circuit.
  • It is important to identify and address these causes promptly to prevent further damage to the vehicle.

To fix the p1e1b automobile fault code, check the possible causes and inspect the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1e1b, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1E1B has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the cost of fixing the P1E1B fault code will depend on the hourly rate charged by the repair shop.

It is important to consider this factor when budgeting for the repair of this fault code.

The P1E1B fault code relates to the power inverter module in a hybrid vehicle.

This module contains three motor control modules and the hybrid powertrain control module. The fault code specifically refers to the auxiliary transmission fluid pump control module hybrid battery voltage isolation sensing performance. The motor control modules measure hybrid battery high voltage and test for loss of isolation between the high-voltage circuits and vehicle chassis.

The motor control module loss of isolation is detected through the use of two high-impedance resistors and voltage measuring circuitry.

The motor control module monitors the loss of isolation voltage measuring circuitry for correct operation.

What is the possible cause of the automobile fault code P1E1B?

If you see the engine light on or the service engine soon warning light, it could be due to the P1E1B fault code. This code is usually caused by a faulty power inverter module, an open or shorted power inverter module harness, or a poor electrical connection in the power inverter module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P1E1B fault code in my automobile?

If you’re experiencing the P1E1B fault code in your automobile, you may notice that the engine light is on or the service engine soon warning light is illuminated. This issue is typically caused by a faulty power inverter module, an open or shorted power inverter module harness, or poor electrical connections in the power inverter module circuit. To fix the problem, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

What should I visually inspect to troubleshoot the P1E1B fault code?

If you’re experiencing the P1E1B fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code is caused by a faulty Program Power Inverter Module, faulty Power Inverter Module, Power Inverter Module harness that is open or shorted, or a Power Inverter Module circuit with poor electrical connection. Check the “Possible Causes” listed above for a fix.

p1e1b error fault code explained

If the engine light is on, check the power inverter module, its harness, and circuit connections for faults.

Visually inspect the wiring harness and connectors for damage, and look for broken, bent, pushed out, or corroded connector pins.

Scroll to Top