The P1E17 automobile fault code indicates a problem with the Power Inverter Module, which can cause the engine light to turn on.

The cause of this issue could be a faulty module, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can affect the performance of the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1e17 fault code.

Here are the symptoms to look out for:

  • The P1E17 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the vehicle.
  • Additionally, the code may cause issues with the transmission, such as harsh shifting or failure to shift gears properly.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1E17 fault code can be caused by a faulty power inverter module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1E17 can be caused by a faulty Power Inverter Module.
  • It can also be caused by an open or shorted Power Inverter Module harness.
  • Additionally, a poor electrical connection in the Power Inverter Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code p1e17, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1E17, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1E17 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour.

The cost of auto repair varies between $75 and $150 per hour, depending on the auto repair shop. These factors should be considered when estimating the cost of diagnosing and fixing the P1E17 fault code.

The P1E17 fault code is related to the power inverter module in hybrid vehicles. This module contains three motor control modules and the hybrid powertrain control module. The fault is specific to the Drive Motor 2 Control Module’s 5 Volt Reference 1 Circuit and is handled internally within the power inverter module.

No external circuits are involved, and the motor control modules and hybrid powertrain control module are not serviced separately.

What are the possible causes of the P1E17 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1E17 fault code. This code is usually caused by a faulty power inverter module, an open or shorted power inverter module harness, or a poor electrical connection in the power inverter module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1E17 fault code?

If you’re experiencing the P1E17 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. The cause of this issue could be a faulty power inverter module, an open or shorted harness, or a poor electrical connection in the power inverter module circuit. To address these possible causes, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the signs of damaged components that I should look for when fixing the P1E17 fault code?

If you’re dealing with a P1E17 fault code, you may notice the engine light or service engine soon warning light is on. This is typically caused by a faulty power inverter module, an open or shorted harness, or poor electrical connection in the power inverter module circuit. To fix the issue, start by visually inspecting the wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector pins.

p1e17 error fault code explained

If your engine light is on, it could be due to a faulty power inverter module, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top