The P1E16 automobile fault code indicates a problem with the Power Inverter Module, which can cause the engine light to turn on. The cause of this issue could be a faulty module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the performance of the vehicle.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E16: Uncovering The Symptoms Of This Auto Fault Code
If you notice the engine light on or service engine soon warning light, it could be a sign of P1E16 fault code.
Here are the symptoms to look out for:
- The P1E16 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience transmission shifting issues, and the driver may notice a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P1E16: Common Causes Of This Fault Code
The P1E16 fault code can be caused by a faulty power inverter module, open or shorted harness, or poor electrical connection.
- The automobile fault code P1E16 can be caused by a faulty Power Inverter Module.
- It can also be caused by an open or shorted Power Inverter Module harness.
- Additionally, a poor electrical connection in the Power Inverter Module circuit can also trigger this fault code.
Fix Code P1E16: Simple Steps To Get Your Car Running
Below are some possible fixes for the automobile fault code p1e16, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P1E16, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1E16: Affordable Fix For Complex Automobiles
The automobile fault code P1E16 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of diagnosis and fixing the P1E16 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P1E16: Your Car’s Battery Is In Trouble
The P1E16 fault code is related to the power inverter module in a hybrid vehicle. This module contains three motor control modules and the hybrid powertrain control module. The fault is specific to the Drive Motor 1 Control Module’s 5 Volt Reference 2 Circuit and is handled internally within the power inverter module.
No external circuits are involved, and the motor control modules and hybrid powertrain control module are not serviced separately.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E16 fault code. This code is caused by a faulty power inverter module, an open or shorted harness, or poor electrical connection in the power inverter module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P1E16 fault code, there are a few things you can do to fix it. Firstly, check for a faulty Power Inverter Module or a poor electrical connection in the Power Inverter Module circuit. To do this, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1E16 fault code, which indicates a faulty Power Inverter Module, can lead to serious consequences such as reduced fuel efficiency, engine misfires, and even engine failure. It is important to fix the issue in a timely manner by visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty power inverter module, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.
