The P1D73 automobile fault code indicates an issue with the Active Grill Shutter (AGS) system.
The symptom is an illuminated Engine Light or Service Engine Soon Warning Light. The cause could be an obstructed or faulty AGS actuator, or a poor electrical connection in the AGS actuator circuit.
The importance of repairing this issue lies in the fact that it affects the vehicle’s fuel efficiency and performance. The difficulty level of the repair is moderate, with a repair time of 1.0. To fix the issue, one should visually inspect the wiring harness and connectors, and check for damaged components or corroded connector pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1D73: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1d73 fault code.
Here are the symptoms to look out for:
- The P1D73 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience a decrease in acceleration or a loss of power while driving.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding P1D73: Common Causes Of The Fault Code
The P1D73 fault code in automobiles can be caused by various factors, including obstructed AGS and faulty AGS actuator.
- The automobile fault code P1D73 can be caused by several factors.
- These include an obstructed or binding Active Grill Shutter (AGS), a faulty AGS actuator, an open or shorted AGS actuator harness, and poor electrical connection in the AGS actuator circuit.
- It is important to identify the specific cause of the fault code to determine the appropriate solution for the problem.
Fix Code P1D73: Simple Steps To Get Your Car Running
To fix the p1d73 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p1d73, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1D73 Fixing Cost & Complexity
The fault code P1D73 indicates an issue with the hybrid battery pack coolant pump. The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.
Therefore, the total cost of fixing this issue can range from $75 to $150.
P1D73: Your Car’s Fuel System Needs Attention
The P1D73 fault code is related to the Active Grill Shutter (AGS) Actuator.
It indicates that the AGS Actuator has not performed as expected.
The Powertrain Control Module (PCM) has received a message that the AGS Actuator has either traveled beyond 100 degrees or has detected a mechanical stop before reaching the commanded position. This fault code is important to address as it can affect the performance of the AGS system, which is responsible for regulating airflow to the engine.
FAQ
If you see the P1D73 fault code in your automobile, it means that the Engine Light is ON, and the Active Grill Shutter (AGS) is obstructed or binding. The cause could be a faulty AGS actuator, an open or shorted AGS actuator harness, or a poor electrical connection in the AGS actuator circuit. To fix the issue, you need to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1D73 fault code, which is indicated by the engine light or service engine soon warning light being on, you can visually inspect the wiring harness and connectors related to the issue. The possible causes include an obstructed or faulty Active Grill Shutter (AGS) Actuator, an open or shorted AGS Actuator harness, or a poor electrical connection in the AGS Actuator circuit. To fix the issue, check the possible causes and visually inspect the wiring harness and connectors for any damage or broken, bent, pushed out, or corroded pins.
Ignoring the P1D73 fault code in an automobile can lead to serious consequences. The engine light will remain on, indicating a problem with the Active Grill Shutter (AGS) system. This can result in reduced fuel efficiency, engine overheating, and potential damage to the engine. It is important to address the issue by visually inspecting the wiring harness and connectors, checking for damaged components, and fixing any issues with the AGS actuator.
Wrap Up
If your engine light is on, it could be due to an obstructed or faulty Active Grill Shutter (AGS) Actuator. Check the wiring harness and connectors for damage, and look for broken or corroded pins.
Take action to fix the issue as soon as possible.
