If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P1D70 fault code. This code indicates a problem with the Traction Motor Phase Current Sensors, which could be faulty, have an open or shorted harness, or a poor electrical connection. The Motor Control Module (Traction) could also be the culprit.

It’s important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated at 1.0.

Understanding how to interpret fault codes can help you diagnose and fix issues with your automobile.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1d70 fault code.

Here are the symptoms to look out for:

  • The P1D70 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and the engine may emit unusual noises or vibrations.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1D70 automobile fault code can be caused by various factors, including faulty sensors, poor electrical connections, and a malfunctioning motor control module.

  • The automobile fault code P1D70 can be caused by several factors.
  • These include faulty traction motor phase current sensors, an open or shorted harness for the traction motor phase current sensors, a poor electrical connection in the traction motor phase current sensors circuit, and a faulty motor control module for the traction.
  • It is important to identify and address these causes promptly to prevent further damage to the vehicle.

Below are the possible fixes for the automobile fault code p1d70, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1D70, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1D70 indicates an issue with the hybrid battery pack. The estimated repair time for this fault code is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

It is important to address this issue promptly to avoid further damage and potential safety hazards.

The P1D70 fault code is related to the motor control module (traction) in an automobile.

This fault code occurs when multiple motor phase current sensors malfunction.

If one sensor malfunctions, the motor control module can still have control, but if two sensors malfunction, the module cannot control. The motor control module detects this malfunction and stores a DTC, resulting in the P1D70 code.

What are the possible causes of the P1D70 fault code?

The P1D70 fault code is indicated by the Engine Light ON or Service Engine Soon Warning Light. The possible causes of this fault code include faulty Traction Motor Phase Current Sensors, an open or shorted Traction Motor Phase Current Sensors harness, a poor electrical connection in the Traction Motor Phase Current Sensors circuit, or a faulty Motor Control Module (Traction). To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1D70 fault code?

To fix the P1D70 fault code, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help identify any issues with the Traction Motor Phase Current Sensors harness and circuit poor electrical connection.

Is a faulty Motor Control Module (Traction) a common cause of the P1D70 fault code?

A faulty Motor Control Module (Traction) can be a possible cause of the P1D70 fault code, which triggers the Engine Light ON or Service Engine Soon Warning Light. Other possible causes include faulty Traction Motor Phase Current Sensors, open or shorted harness, and poor electrical connection. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p1d70 error fault code explained

If your engine light is on, it could be due to faulty traction motor phase current sensors, an open or shorted harness, poor electrical connection, or a faulty motor control module.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top