The P1D60 automobile fault code indicates a problem with the Transmission Control Module (TCM).
The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty TCM, an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. The importance of repairing this issue lies in the fact that it can affect the performance of the transmission.
The difficulty of the repair is moderate, with a repair time of 1.0.
To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
It is essential to interpret the fault code correctly to ensure the proper repair of the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1D60: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1d60 fault code. Here are the symptoms to look out for:
- The P1D60 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P1D60: What Triggers This Fault Code?
The automobile fault code P1D60 can be caused by a faulty TCM, open or shorted TCM harness, or poor electrical connection.
- The automobile fault code P1D60 can be caused by a faulty Transmission Control Module (TCM).
- It can also be caused by an open or shorted Transmission Control Module (TCM) harness.
- Additionally, a poor electrical connection in the Transmission Control Module (TCM) circuit can also trigger this fault code.
Fix Code P1D60: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p1d60, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P1D60, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1D60: Affordable Fix For Your Car
The automobile fault code P1D60 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P1D60 will depend on the hourly rate charged by the repair shop.
P1D60: Your Car’s Battery Needs Attention
The P1D60 fault code is related to the power supply of the Transmission Control Module (TCM).
The TCM receives power through three input pins: PWRSPLYVS1, PWRSPLYVS2, and PWRSPLYVS3. The diagnostic checks for any electrical faults in the power supply by continuously measuring the voltage value of each input pin.
If the voltage value of any input pin is less than its threshold, the diagnostic will set a fault in the TCM, indicating a Power Supply 3 Circuit Fault.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1D60 fault code. This code is usually caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1D60 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1D60 fault code in an automobile can lead to serious consequences. The engine light will remain on, indicating a faulty Transmission Control Module (TCM), which can cause the transmission to malfunction. It is important to visually inspect the wiring harness and connectors, and check for damaged components to avoid further damage.
Wrap Up
If your engine light is on, it could be due to a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out connector pins.
