The P1D59 fault code in automobiles indicates a problem with the 5 Volt Supply 1 Circuit, which can result in the Engine Light turning on. The cause of this issue can be traced back to a short circuit or high resistance in the circuit, a faulty Transmission Control Module (TCM), or a short circuit to voltage or ground.

The importance of fixing this issue lies in the fact that it can affect the performance of the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1d59 fault code.

Here are the symptoms to look out for:

  • The P1D59 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1D59 fault code in automobiles can be caused by various factors, including issues with the 5 Volt Supply 1 Circuit and a faulty Transmission Control Module (TCM).

  • The automobile fault code P1D59 can be caused by a 5 Volt Supply 1 Circuit Open or High Resistance.
  • It can also be caused by a 5 Volt Supply 1 Circuit Shorted to ground or voltage.
  • Another possible cause is a faulty Transmission Control Module (TCM).
  • It is important to address these causes promptly to ensure the proper functioning of the vehicle.

Below are the possible fixes for the automobile fault code p1d59, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1d59, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1D59 is a diagnostic trouble code related to the hybrid battery pack.

The estimated repair time for this code is 1.0 hour. The cost of fixing this code is dependent on the hourly rate charged by the auto repair shop.

The average hourly rate charged by most auto repair shops is between $75 and $150. Therefore, the cost of fixing the P1D59 fault code can range from $75 to $150.

The P1D59 fault code checks for electrical faults in the sensor power supplies, sensor module, or connecting wiring.

There are three different sensor power supplies: VS1, VS2, and VS3.

The diagnostic continuously checks the result of the internal integrated circuit test by reading an internal register via SPI communication interface.

If an electrical fault is detected on at least one of the three supplies, the diagnostic will set a fault in the TCM.

The P1D59 code specifically indicates a fault in Sensor Power Supply 1 Circuit.

What are the possible causes of the P1D59 fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P1D59 fault code. This code is caused by a 5 Volt Supply 1 Circuit Open or High Resistance, 5 Volt Supply 1 Circuit Shorted to ground, 5 Volt Supply 1 Circuit Shorted to voltage, or a faulty Transmission Control Module (TCM). To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1D59 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the P1D59 fault code, there are a few things you can do to fix it. First, check the possible causes, which include an open or high resistance in the 5 Volt Supply 1 Circuit, a short to ground or voltage in the same circuit, or a faulty Transmission Control Module (TCM). To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

Is a faulty Transmission Control Module (TCM) a common cause of the P1D59 fault code?

A faulty Transmission Control Module (TCM) is listed as one of the possible causes of the P1D59 fault code, which is indicated by the engine light turning on. Other possible causes include an open or high resistance in the 5 Volt Supply 1 Circuit, or a short circuit to ground or voltage. To fix the issue, one should visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

p1d59 error fault code explained

If your engine light is on, it could be due to a 5 Volt Supply 1 Circuit issue or a faulty Transmission Control Module (TCM). Visually inspect the wiring harness and connectors for damage, and check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top