The P1CAE automobile fault code indicates a problem with the transmission hydraulic system, mechanical operation, or the transmission controller module (TCM). The most common symptom is the engine light turning on.

It is crucial to address this issue promptly as it can lead to further damage to the transmission. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the issue, one should visually inspect the wiring harness and connectors for any damage or corrosion.

It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1cae fault code. Here are the symptoms to look out for:

  • The P1CAE fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1CAE automobile fault code can be caused by a faulty transmission hydraulic system, transmission mechanical operation problem, or a faulty TCM.

  • The automobile fault code P1CAE can be caused by a faulty transmission hydraulic system.
  • It can also be caused by a transmission mechanical operation problem.
  • Another cause of this fault code is a faulty transmission controller module (TCM).
  • It is important to address these issues promptly to ensure the proper functioning of the vehicle.

Below are some possible fixes for the automobile fault code p1cae, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1cae, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1CAE has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P1CAE will be between $75 and $150, depending on the repair time required.

The P1CAE fault code is related to the gear shift actuator 2nd-4th.

It checks if the gear shift actuator has responded properly to the TCM disengage command. The TCM controls the gear shift actuator via electrovalves PPV1 and PPV2.

This diagnostic confirms if the gear shift actuator has moved to the correct position and if the gear has been disengaged. In short, the P1CAE code indicates a failure in disengaging the gear shift actuator 2nd-4th.

What are the possible causes of the P1CAE automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1CAE fault code. This code is often caused by a faulty transmission hydraulic system, transmission mechanical operation problem, or a faulty transmission controller module (TCM). To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1CAE fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P1CAE fault code, there are a few possible causes to consider. These include a faulty Transmission Hydraulic System, Transmission Mechanical Operation Problem, or a faulty Transmission Controller Module (TCM). To fix the issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of a faulty Transmission Controller Module (TCM) that could lead to the P1CAE fault code?

If you notice the engine light or service engine soon warning light on, it could be a sign of a faulty Transmission Controller Module (TCM) leading to the P1CAE fault code. This could be caused by a faulty transmission hydraulic system, transmission mechanical operation problem, or a faulty TCM. To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

p1cae error fault code explained

If your engine light is on, it could be due to a faulty transmission hydraulic system, transmission mechanical operation problem, or faulty transmission controller module.

Check the possible causes listed above, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top