If you see the engine light on or the service engine soon warning light, it could be due to the P1C12 fault code. This code indicates a problem with the vacuum pump relay, which could be faulty, have an open or shorted harness, or a poor electrical connection.

It’s important to address this issue promptly as it could lead to further damage to your vehicle.

The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion. To interpret the fault code, you’ll need an OBD-II scanner or code reader.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1c12 fault code. Here are the symptoms to look out for:

  • The P1C12 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting problems, and the engine may emit unusual noises or vibrations.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1C12 fault code can be caused by a faulty vacuum pump relay, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1C12 can be caused by a faulty vacuum pump relay.
  • It can also be caused by an open or shorted vacuum pump relay harness.
  • Additionally, a poor electrical connection in the vacuum pump relay circuit can also trigger this fault code.

To fix the p1c12 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1C12, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1C12 are: – Estimated repair time of 1.0 hour – Auto repair shops charge between $75 and $150 per hour – The complexity of the issue – The availability of replacement parts – The expertise of the mechanic – The location of the repair shop – The type of vehicle being repaired – The warranty or insurance coverage on the vehicle.

The P1C12 code is related to the Vacuum Pump Relay. The Engine Control Module (ECM) keeps an eye on this relay. If the Vacuum Pump Relay is not up to the factory specifications, the ECM sets the P1C12 code.

This code indicates that the Vacuum Pump Relay is stuck closed. It means that the relay is not functioning properly and needs to be fixed or replaced.

If left unaddressed, this issue can lead to further damage to the vehicle’s engine. Therefore, it is important to get this issue resolved as soon as possible.

What are the possible causes of the P1C12 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1C12 fault code. This code is caused by a faulty vacuum pump relay, an open or shorted vacuum pump relay harness, or a poor electrical connection in the vacuum pump relay circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1C12 fault code?

If you’re experiencing the P1C12 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few possible causes. One of them is a faulty Vacuum Pump Relay, which could be due to an open or shorted harness or poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs that the Vacuum Pump Relay harness is open or shorted, causing the P1C12 fault code?

If you notice the engine light or service engine soon warning light on, it could be a sign of a faulty Vacuum Pump Relay or an open or shorted Vacuum Pump Relay harness. To fix this, you should visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector’s pins.

p1c12 error fault code explained

If your engine light is on, it could be due to a faulty vacuum pump relay, an open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top