The P1C10 automobile fault code indicates a problem with the vacuum pump relay, which can cause the engine light to turn on.

This fault code can be caused by a faulty vacuum pump relay, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1c10 fault code. Here are the symptoms to look out for:

  • The P1C10 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

P1C10 fault code can be caused by a faulty vacuum pump relay, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1C10 can be caused by a faulty vacuum pump relay.
  • It can also be caused by an open or shorted vacuum pump relay harness.
  • Additionally, a poor electrical connection in the vacuum pump relay circuit can also trigger this fault code.

To fix the p1c10 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P1C10, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the P1C10 automobile fault code are: – The estimated repair time is 1.0 hour. – Auto repair shops typically charge between $75 and $150 per hour.

– The cost may vary depending on the location and reputation of the repair shop. – The cost may also depend on the severity of the issue causing the fault code. – Additional parts or labor may be required, which can increase the cost.

The P1C10 code is related to the Vacuum Pump Relay.

The Engine Control Module (ECM) keeps an eye on the Vacuum Pump Relay.

If the Vacuum Pump Relay is not up to the factory specifications, the ECM sets the P1C10 code. This code indicates that there is a problem with the Vacuum Pump functionality.

What are the possible causes of the P1C10 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1C10 fault code. This code is caused by a faulty vacuum pump relay, an open or shorted vacuum pump relay harness, or a poor electrical connection in the vacuum pump relay circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1C10 fault code?

If you’re experiencing the P1C10 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few possible causes. One of them is a faulty vacuum pump relay, an open or shorted vacuum pump relay harness, or a poor electrical connection in the vacuum pump relay circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the signs that the Vacuum Pump Relay harness is open or shorted, causing the P1C10 fault code?

If you notice the engine light or service engine soon warning light is on, it could be a sign of a faulty Vacuum Pump Relay. The P1C10 fault code may be caused by an open or shorted Vacuum Pump Relay harness or a poor electrical connection in the Vacuum Pump Relay circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p1c10 error fault code explained

If your engine light is on, it could be due to a faulty vacuum pump relay, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top