The P1C07 automobile fault code indicates a problem with the 12V Battery Relay, which can cause the engine light to turn on. The cause of this issue could be a faulty relay, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can lead to further damage to the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1c07 fault code.

Here are the symptoms to look out for:

  • The P1C07 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the vehicle.
  • Additionally, the code may indicate issues with the transmission or problems with the vehicle’s battery.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1C07 fault code in automobiles can be caused by various factors, including a faulty 12V Battery Relay, open or shorted harness, and poor electrical connection.

  • The automobile fault code P1C07 can be caused by a faulty 12V battery relay.
  • It can also be caused by an open or shorted 12V battery relay harness.
  • Additionally, a poor electrical connection in the 12V battery relay circuit can also trigger this fault code.

To fix the p1c07 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code P1C07, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the P1C07 automobile fault code based on the estimated repair time of 1.0 hour are: – The hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour. – The complexity of the repair required to fix the fault code. – The availability and cost of replacement parts needed for the repair. – The experience and expertise of the mechanic performing the repair. – The location of the auto repair shop, as labor rates can vary by region.

The P1C07 fault code is related to the 12V Battery Relay in the automobile. The Engine Control Module (ECM) is responsible for monitoring this relay.

If the 12V Battery Relay is not up to the factory specifications, the ECM sets the OBDII code. The P1C07 code specifically refers to an open circuit performance issue with the 12V Battery Relay.

This fault code indicates that there is an issue with the electrical connection in the circuit. It is important to address this issue promptly to avoid further damage to the vehicle.

What are the possible causes of the P1C07 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1C07 fault code. This code is usually caused by a faulty 12V battery relay, an open or shorted 12V battery relay harness, or a poor electrical connection in the 12V battery relay circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1C07 fault code?

If you’re experiencing the P1C07 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty 12V Battery Relay or an open or shorted 12V Battery Relay harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the signs of damaged components or broken, bent, pushed out, or corroded connector’s pins that I should look for when fixing the P1C07 fault code?

If you’re dealing with a P1C07 fault code, you may notice that the engine light is on or the service engine soon warning light is illuminated. The cause of this issue could be a faulty 12V Battery Relay, an open or shorted 12V Battery Relay harness, or a poor electrical connection in the 12V Battery Relay circuit. To fix this problem, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for signs of damaged components, such as broken, bent, pushed out, or corroded connector’s pins.

p1c07 error fault code explained

If your engine light is on, it could be due to a faulty 12V battery relay, an open or shorted harness, or poor electrical connection.

Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top