The P1C04 automobile fault code indicates a problem with the Output Clutch Linear Solenoid, which can cause the engine light to turn on. This fault code can be caused by a faulty solenoid, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is moderate, and it can take up to 1.0 hour to fix. To interpret the fault code, it is recommended to check the possible causes listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1c04 fault code. Here are the symptoms to look out for:

  • The P1C04 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the vehicle.
  • Additionally, the code may indicate issues with the transmission or problems with the vehicle’s battery or charging system.
  • It is important to have the code diagnosed and repaired promptly to prevent further damage to the vehicle.

The P1C04 fault code can be caused by a faulty solenoid, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1C04 can be caused by a faulty Output Clutch Linear Solenoid.
  • It can also be caused by an open or shorted Output Clutch Linear Solenoid harness.
  • Additionally, a poor electrical connection in the Output Clutch Linear Solenoid circuit can also trigger this fault code.

To fix the p1c04 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P1C04, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of fixing the automobile fault code P1C04 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour. The cost of fixing the fault code will depend on the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the availability of replacement parts.

The P1C04 code is an OBDII fault code that indicates an issue with the Output Clutch Linear Solenoid. The Engine Control Module (ECM) monitors the Output Clutch Linear Solenoid and sets the code when it is not functioning to factory specifications.

Specifically, the P1C04 code indicates that there is a low control circuit in the Output Clutch Linear Solenoid. This can cause issues with the transmission and should be addressed promptly.

What is the possible cause of the P1C04 fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1C04 fault code. This code is usually caused by a faulty output clutch linear solenoid, an open or shorted harness, or a poor electrical connection in the output clutch linear solenoid circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can the Output Clutch Linear Solenoid be checked for faults?

If the engine light is on, it could be due to a faulty Output Clutch Linear Solenoid. To check for faults, inspect the related wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins. Check for open or shorted circuits and poor electrical connections. Fix the possible causes listed above to resolve the issue.

What are the steps to visually inspect the related wiring harness and connectors for the P1C04 fault code?

To visually inspect the related wiring harness and connectors for the P1C04 fault code, first check the possible causes listed above. Then, inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector pins. This will help identify any issues with the Output Clutch Linear Solenoid or its circuit connections.

p1c04 error fault code explained

If your engine light is on, it could be due to a faulty Output Clutch Linear Solenoid or related wiring issues. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Scroll to Top