The P1BFF automobile fault code indicates a problem with the Auxiliary Transmission Fluid Pump Motor Control Module. This can cause the engine light to turn on, indicating a need for service.

The cause of this fault code could be a faulty control module, an open or shorted harness, or poor electrical connections.

It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated at 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle. To interpret the fault code, it is recommended to check the possible causes listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1bff fault code. Here are the symptoms to look out for:

  • The P1BFF fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, poor acceleration, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting or fail to start altogether.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1BFF fault code can be caused by a faulty motor control module or poor electrical connection.

  • The automobile fault code P1BFF can be caused by a faulty Auxiliary Transmission Fluid Pump Motor Control Module.
  • It can also be caused by an open or shorted Auxiliary Transmission Fluid Pump Motor Control Module harness.
  • Additionally, a poor electrical connection in the Auxiliary Transmission Fluid Pump Motor Control Module circuit can also trigger this fault code.

To fix the p1bff automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1bff, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1BFF has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P1BFF will depend on the hourly rate charged by the repair shop.

It is important to consider these factors when budgeting for the repair of an automobile with the P1BFF fault code.

The P1BFF fault code is related to the auxiliary transmission fluid pump control module.

It is an internal fault detection, which means that the modules listed below are internal to the power inverter module and are not serviced separately. The fault is handled inside the hybrid powertrain control module, and no external circuits are involved. The code indicates that the auxiliary transmission fluid pump motor control module is not programmable.

What are the possible causes of the P1BFF fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BFF fault code. This code is caused by a faulty auxiliary transmission fluid pump motor control module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P1BFF fault code?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a P1BFF fault code. This is typically caused by a faulty Auxiliary Transmission Fluid Pump Motor Control Module or an open/shorted harness. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out connector pins and replace any damaged components as necessary.

What should I visually inspect when trying to fix the P1BFF fault code?

If you’re trying to fix the P1BFF fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty Auxiliary Transmission Fluid Pump Motor Control Module, an open or shorted harness, or a poor electrical connection. To fix the problem, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins to ensure everything is in working order.

p1bff error fault code explained

If your engine light is on, it could be due to a faulty Auxiliary Transmission Fluid Pump Motor Control Module or related wiring issues. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Scroll to Top