The P1BFA fault code in automobiles indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the engine light turning on. It is crucial to address this issue promptly as it can lead to reduced fuel efficiency and even engine damage.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is moderate, and it takes approximately 1.0 hour to fix. It is essential to interpret the fault code accurately to ensure the correct repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1bfa fault code. Here are the symptoms to look out for:

  • The P1BFA fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

P1BFA fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1BFA can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1BFA fault code.

To fix the p1bfa automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1bfa, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1BFA is related to the hybrid battery pack coolant pump. The symptoms include a warning light on the dashboard and a possible decrease in fuel efficiency.

The cause of the fault code is a malfunction in the coolant pump circuit. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code can range from $75 to $150 per hour, depending on the auto repair shop.

The P1BFA code is related to the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and series.

There are three battery sections, each with a different number of cells. The battery energy control module monitors the voltage of the 96 battery cell groups. The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information.

The P1BFA code indicates a low voltage condition in battery section one.

What are the possible causes of the P1BFA automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BFA fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1BFA fault code?

If you’re experiencing the P1BFA fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components that I should look for when fixing the P1BFA fault code?

If you’re fixing the P1BFA fault code, keep an eye out for the engine light or service engine soon warning light. The possible causes are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, visually inspect the related wiring harness and connectors for any damaged components, and check for broken, bent, pushed out, or corroded connector’s pins.

p1bfa error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module.

Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top