The P1BF8 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The importance of repairing this issue lies in the fact that it can affect the performance and efficiency of the vehicle.

The difficulty level of the repair is moderate, and it can take up to 1.0 hour to fix. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1bf8 fault code. Here are the symptoms to look out for:

  • The P1BF8 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine misfires, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience stalling or difficulty starting, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1BF8 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1BF8 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of this particular fault code.

Below are the possible fixes for the automobile fault code p1bf8, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1bf8, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1BF8 indicates an issue with the engine coolant pump control circuit. The estimated repair time for this fault is 1.0 hour.

The cost of fixing this fault will depend on the hourly rate charged by the auto repair shop. Most shops charge between $75 and $150 per hour for repairs.

Therefore, the cost of fixing this fault can range from $75 to $150.

The P1BF8 code is related to the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and series. There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.

The battery energy control module will determine when a fault condition is present and communicate it to the hybridEV powertrain control module 2. The P1BF8 code indicates a high voltage issue in the HybridElectric Vehicle Battery 92 Circuit.

What are the possible causes of the P1BF8 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BF8 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1BF8 fault code?

If you’re experiencing the P1BF8 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. It’s important to check the “Possible Causes” listed above before proceeding with any repairs.

What are the consequences of ignoring the P1BF8 fault code?

Ignoring the P1BF8 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, and the vehicle may experience reduced performance or even fail to start. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p1bf8 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken or corroded pins.

Inspect the components listed above to fix the issue.

Scroll to Top