The P1BF7 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. The cause of this issue is usually a faulty battery pack or control module.

It is important to address this issue promptly as it can lead to further damage to the vehicle.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion.

It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1bf7 fault code. Here are the symptoms to look out for:

  • The P1BF7 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

P1BF7 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1BF7 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of this particular fault code.

To fix the p1bf7 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p1bf7, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1BF7 is a common issue in automobiles. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code varies between $75 and $150 per hour, depending on the auto repair shop. The cost may also vary based on the severity of the issue and the type of vehicle. It is important to get this fault code fixed as soon as possible to avoid any further damage to the vehicle.

The P1BF7 code indicates a low voltage in the HybridElectric Vehicle Battery 92 Circuit. The battery pack contains 288 cells grouped in parallel and series. The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.

The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.

The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information.

What are the possible causes of the P1BF7 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BF7 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1BF7 fault code?

If you’re experiencing the P1BF7 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. It’s important to check the “Possible Causes” listed above before proceeding with any repairs.

What are the consequences of ignoring the P1BF7 fault code?

Ignoring the P1BF7 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s battery system. This can result in reduced fuel efficiency, decreased performance, and potential damage to other components. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p1bf7 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components listed above to fix the issue.

Scroll to Top