The P1BF3 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. The cause of this issue is usually a faulty battery pack or control module.

It is important to address this issue promptly as it can lead to further damage to the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion. It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the engine light on or service engine soon warning light, it could be a sign of p1bf3 fault code. Here are the symptoms to look out for:

  • The P1BF3 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience transmission shifting issues, and the driver may notice a decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1BF3 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1BF3 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1BF3 fault code.

To fix the p1bf3 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1bf3, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1BF3 is a common issue in automobiles. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code varies between $75 and $150 per hour, depending on the auto repair shop.

The cost may also vary based on the severity of the issue and the type of vehicle. It is important to get this fault code fixed as soon as possible to avoid any further damage to the vehicle.

The P1BF3 code refers to a fault in the HybridElectric Vehicle Battery 91 Circuit Performance. The battery pack contains 288 cells grouped in parallel and connected in-series. The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybridEV battery interface control modules.

The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2 through serial data.

The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information.

What are the possible causes of the P1BF3 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BF3 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1BF3 fault code?

If you’re experiencing the P1BF3 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and take the necessary steps to resolve them.

What are the consequences of ignoring the P1BF3 fault code and not fixing it in time?

Ignoring the P1BF3 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle may not operate at its full potential. It is important to address the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p1bf3 error fault code explained

If your engine light is on, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. Check the possible causes listed above, inspect the wiring harness and connectors, and look for damaged components or corroded connector pins.

Scroll to Top