The P1BF2 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module.

The most common symptom is the Engine Light turning on.

The cause of this issue is a faulty battery pack or control module. It is important to address this issue promptly as it can lead to further damage to the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion. It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1bf2 fault code. Here are the symptoms to look out for:

  • The P1BF2 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P1BF2 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1BF2 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of this particular fault code.

Below are the possible fixes for the automobile fault code p1bf2, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1bf2, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1BF2 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P1BF2 will be between $75 and $150, depending on the repair time required.

The P1BF2 code is related to the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and series.

There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The P1BF2 code indicates a high voltage issue in battery section one, which contains cells 67 through to 96. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.

What are the possible causes of the P1BF2 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1BF2 fault code. This code is caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1BF2 fault code?

If you’re experiencing the P1BF2 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the signs of damaged components that I should look for when fixing the P1BF2 fault code?

If you’re fixing the P1BF2 fault code, keep an eye out for the engine light or service engine soon warning light turning on. This is a symptom of the issue. The cause could be a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

p1bf2 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top