The P1B99 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. The cause of this issue is usually a faulty battery pack or control module.

It is important to address this issue promptly as it can lead to reduced fuel efficiency and performance. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix.

To diagnose the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion. The possible fix is to replace the faulty components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b99 fault code. Here are the symptoms to look out for:

  • The P1B99 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1B99 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B99 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1B99 fault code.

To fix the p1b99 automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code P1B99, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the P1B99 automobile fault code are: – The estimated repair time is 1.0 hour. – Auto repair shops typically charge between $75 and $150 per hour. – The complexity of the issue and the required parts can also affect the cost. – The expertise and experience of the mechanic can also impact the cost. – The location of the repair shop can also affect the cost due to varying labor rates.

The P1B99 fault code relates to the HybridElectric Vehicle battery pack.

The battery pack contains 288 cells grouped in parallel. There are three battery sections, each with a different number of cells.

The battery energy control module monitors the voltage of the 96 battery cell groups. The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information.

What are the possible causes of the P1B99 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1B99 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1B99 fault code?

If you’re experiencing the P1B99 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. The possible causes of this issue include a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To address this problem, you should visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the P1B99 fault code and not fixing it in time?

Ignoring the P1B99 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s battery system. This can result in reduced fuel efficiency, decreased power, and even complete failure of the battery system. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.

p1b99 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components listed above to fix the issue.

Scroll to Top