The P1B96 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module.

The most common symptom is the Engine Light turning on.

The cause of this issue is a faulty battery pack or control module.

It is important to address this issue promptly as it can lead to further damage to the vehicle.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion. It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1b96 fault code. Here are the symptoms to look out for:

  • The P1B96 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1B96 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B96 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1B96 fault code.

To fix the p1b96 automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code P1B96, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1B96 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour. These factors should be considered when estimating the cost of diagnosing and fixing the P1B96 fault code.

The P1B96 code refers to a performance issue in the HybridElectric Vehicle Battery 60 Circuit.

The battery pack contains 288 cells grouped in parallel and series.

There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.

The P1B96 code indicates a fault condition in the battery circuit, which requires serviceable components to be checked and repaired.

What are the possible causes of the P1B96 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1B96 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1B96 fault code?

If you’re experiencing the P1B96 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of a faulty Hybrid/Electric Vehicle Battery Interface Control Module that can cause the P1B96 fault code?

If you notice the engine light or service engine soon warning light on, it could be a sign of a faulty Hybrid/Electric Vehicle Battery Interface Control Module. This can cause the P1B96 fault code. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p1b96 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components listed above to fix the issue.

Scroll to Top