The P1B80 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom is the Engine Light turning on.

It is crucial to address this issue promptly as it can lead to further damage to the vehicle.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the issue, one must visually inspect the wiring harness and connectors for any damage or corrosion.

It is also recommended to check for broken, bent, or pushed out connector pins.

It is essential to interpret the fault code accurately to ensure the correct repair is performed.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1b80 fault code.

Here are the symptoms to look out for:

  • The P1B80 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

P1B80 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B80 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of the P1B80 fault code.

Below are the possible fixes for the automobile fault code p1b80, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1B80, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1B80 are: – The estimated repair time is 1.0 hour. – Auto repair shops typically charge between $75 and $150 per hour. – The cost may vary depending on the location and reputation of the repair shop.

– The cost may also vary depending on the severity of the issue and the parts that need to be replaced. – It is important to get a detailed estimate from the repair shop before proceeding with the repairs.

The P1B80 code is related to the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and series. There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.

The battery energy control module will determine when a fault condition is present and communicate it to the hybridEV powertrain control module 2. The P1B80 code indicates a high voltage issue in the HybridElectric Vehicle Battery 52 Circuit.

What are the possible causes of the P1B80 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1B80 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P1B80 fault code?

If you’re experiencing the P1B80 fault code, which is indicated by the engine light or service engine soon warning light turning on, you may have a faulty hybrid/electric vehicle battery pack or interface control module. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.

What are the consequences of ignoring the P1B80 fault code?

Ignoring the P1B80 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences such as reduced fuel efficiency, decreased power output, and even complete failure of the hybrid system. It is important to address the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p1b80 error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the wiring harness and connectors for damage, broken or corroded pins. Inspect the components listed above to fix the issue.

Scroll to Top