The P1B79 fault code in automobiles indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom of this issue is the Engine Light turning on. To fix this problem, one needs to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is around 1.0, and it is essential to address this problem as soon as possible to avoid further damage to the vehicle. Understanding the fault code is crucial to diagnose and fix the issue effectively.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1B79: Unresponsive Acceleration – Symptoms Explained
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1b79 fault code.
Here are the symptoms to look out for:
- The P1B79 fault code in an automobile can cause several symptoms.
- The most common symptom is the illumination of the engine light or service engine soon warning light.
- Other symptoms include reduced engine power, poor acceleration, and decreased fuel efficiency.
- The vehicle may also experience stalling or difficulty starting.
- Additionally, the transmission may shift roughly or erratically, and the vehicle may emit unusual noises or vibrations.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P1B79: Uncovering The Culprits Behind The Code
P1B79 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1B79 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of this particular fault code.
Fix Code P1B79: Simple Steps To Get Your Car Running
To fix the p1b79 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code P1B79, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1B79 Repair Cost & Complexity
The automobile fault code P1B79 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of diagnosis and fixing the P1B79 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time.
P1B79: Your Car’s Battery Is In Trouble
The P1B79 code refers to a low voltage issue in the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and in-series. There are three battery sections, each made up of a different number of cells and cell groups.
The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2. The P1B79 code is a fault condition that can be determined by the battery energy control module.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1B79 fault code. This code is caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1B79 fault code, which is indicated by the engine light or service engine soon warning light turning on, you may have a faulty hybrid/electric vehicle battery pack or interface control module. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.
If you notice the engine light or service engine soon warning light on, it could be a sign of a faulty Hybrid/Electric Vehicle Battery Interface Control Module. This can cause the P1B79 fault code. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.
