The P1B4C automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module.

The most common symptom is the Engine Light turning on. The cause of this issue is a faulty battery pack or control module. It is important to address this issue promptly as it can lead to further damage to the vehicle.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion. It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b4c fault code. Here are the symptoms to look out for:

  • The P1B4C fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience misfires, hesitation, or a lack of acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1B4C fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B4C can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of this particular fault code.

To fix the p1b4c automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1b4c, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1B4C are: – The estimated repair time is 1.0 hour. – Auto repair shops usually charge between $75 and $150 per hour. – The complexity of the issue and the required parts can also affect the cost. – The expertise and experience of the mechanic can also impact the cost. – The location of the repair shop can also affect the cost due to varying labor rates.

The P1B4C code indicates a low voltage in the HybridElectric Vehicle battery circuit.

The battery pack contains 288 cells grouped in parallel and series. There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules.

The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2. All components related to the battery energy control module are serviceable.

What are the possible causes of the P1B4C automobile fault code that triggers the engine light or service engine soon warning light?

If you see the engine light ON or Service Engine Soon Warning Light, it could be due to the P1B4C fault code. This code is triggered by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P1B4C automobile fault code, and what steps should be taken to ensure that the issue is resolved?

If you’re experiencing the P1B4C fault code, it’s likely that your engine light is on. This could be due to a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components or broken, bent, pushed out, or corroded connector pins. Check the possible causes listed above to ensure that you’re addressing the root of the problem.

What should be visually inspected and checked for in the related wiring harness and connectors when attempting to fix the P1B4C automobile fault code?

If you’re trying to fix the P1B4C automobile fault code, you should visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This fault code is usually caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. Check the “Possible Causes” listed above to determine the root cause of the issue.

p1b4c error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top