The P1B4A fault code in automobiles indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue is a faulty battery pack or control module.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0.

It is important to address this issue promptly to avoid further damage to the vehicle’s electrical system. To interpret the fault code, one must check the “Possible Causes” listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b4a fault code.

Here are the symptoms to look out for:

  • The P1B4A fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience a loss of acceleration or have trouble shifting gears.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1B4A fault code can be caused by a faulty battery pack or battery interface control module.

  • The automobile fault code P1B4A can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
  • It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
  • These are the only two causes of this particular fault code.

To fix the p1b4a automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1b4a, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code is P1B4A. The estimated repair time is 1.0 hour. The cost of fixing the fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour. Therefore, the fixing cost of the P1B4A fault code will be between $75 and $150.

The P1B4A code is related to the HybridElectric Vehicle battery pack. The battery pack contains 288 cells grouped in parallel and in-series. There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybridEV battery interface control modules. The battery energy control module will determine when a fault condition is present and communicate it to the hybridEV powertrain control module 2. The P1B4A code indicates a high voltage issue in the HybridElectric Vehicle Battery 34 Circuit.

What are the possible causes of the P1B4A automobile fault code that triggers the engine light or service engine soon warning light?

If you see the engine light ON or Service Engine Soon Warning Light, it could be due to the P1B4A fault code. This code is triggered by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P1B4A automobile fault code?

If you’re experiencing an illuminated engine light or service engine soon warning light, it could be due to a faulty hybrid/electric vehicle battery pack or interface control module. To fix the P1B4A fault code, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins. Finally, address any issues with the battery pack or interface control module as needed.

What should be visually inspected and checked for in case of the P1B4A automobile fault code?

If you encounter the P1B4A automobile fault code, the engine light or service engine soon warning light will turn on. The possible causes are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

p1b4a error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top