The P1B2C automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on.

The cause of this issue is a faulty battery pack or control module. It is important to address this issue promptly as it can lead to further damage to the vehicle.

The repair difficulty is moderate, and the repair time is estimated at 1.0 hour.

To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion.

It is also recommended to check for broken, bent, or pushed out connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b2c fault code. Here are the symptoms to look out for:

  • The P1B2C fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, misfires, or unusual noises coming from the engine.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1B2C fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.

  • The automobile fault code P1B2C can be caused by a faulty hybrid/electric vehicle battery pack.
  • It can also be caused by a faulty hybrid/electric vehicle battery interface control module.
  • These are the only two causes of this particular fault code.

To fix the automobile fault code p1b2c, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1b2c, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code is P1B2C. The estimated repair time is 1.0 hour. The cost of fixing the fault code is based on the repair time.

Most auto repair shops charge between $75 and $150 per hour.

These factors are influential in determining the cost of fixing the automobile fault code.

The P1B2C code refers to a fault in the HybridElectric Vehicle Battery 31 Circuit. The battery pack contains 288 cells grouped in parallel and series. There are three battery sections, each with a different number of cells and cell groups.

The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2.

What are the possible causes of the P1B2C automobile fault code that triggers the engine light or service engine soon warning light?

If you see the engine light ON or Service Engine Soon Warning Light, it could be due to the P1B2C fault code. This code is triggered by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P1B2C automobile fault code?

If you’re experiencing an illuminated engine light or service engine soon warning light, it could be due to a P1B2C fault code. This code is typically caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What steps should be taken to visually inspect the related wiring harness and connectors when troubleshooting the P1B2C automobile fault code?

When troubleshooting the P1B2C automobile fault code, start by checking the “Possible Causes” listed above. To visually inspect the related wiring harness and connectors, look for broken, bent, pushed out, or corroded connector’s pins. Check for damaged components to fix the issue.

p1b2c error fault code explained

If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.

Scroll to Top