The P1B25 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module.
The most common symptom is the Engine Light turning on.
It is crucial to address this issue promptly as it can lead to further damage to the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the issue, one must visually inspect the wiring harness and connectors for any damage or corrosion.
It is also recommended to check for broken, bent, or pushed out connector pins. It is essential to interpret the fault code accurately to ensure the correct repair is performed.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1B25: Uncovering The Symptoms Of This Auto Fault Code
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1b25 fault code.
Here are the symptoms to look out for:
- The P1B25 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P1B25: What Triggers This Fault Code?
P1B25 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1B25 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of the P1B25 fault code.
Fix Code P1B25: Simple Steps To Get Your Car Running
To fix the p1b25 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code p1b25, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1B25: Affordable Fix For Your Car
The factors that influence the cost of diagnosing and fixing the automobile fault code P1B25 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour.
These factors should be considered when estimating the cost of diagnosing and fixing the P1B25 fault code.
P1B25: The Low Pressure Fuel System Sensor Circuit Malfunction
The P1B25 code refers to a performance issue in the 32nd circuit of the HybridElectric Vehicle battery pack.
The battery pack contains 288 cells grouped in parallel and connected in-series.
The battery energy control module monitors the voltage of the 96 battery cell groups through the hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2. The P1B25 code indicates a fault condition in the battery pack and requires serviceable components to be checked and repaired.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1B25 fault code. This code is usually caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1B25 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the P1B25 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light or service engine soon warning light will remain on, indicating a problem with the vehicle’s battery system. This can result in reduced fuel efficiency, decreased power, and even complete failure of the battery system. It is important to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.
