The P1AFE fault code in automobiles indicates a problem with the Drive Motor Generator. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty Drive Motor Generator, an open or shorted Drive Motor Generator harness, or a poor electrical connection in the Drive Motor Generator circuit.

The importance of repairing this issue lies in the fact that it can affect the performance of the vehicle. The repair difficulty is moderate, and it takes approximately 1.0 hour to fix. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

It is crucial to interpret the fault code correctly to ensure the proper repair of the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1afe fault code.

Here are the symptoms to look out for:

  • The P1AFE fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1AFE automobile fault code can be caused by a faulty drive motor generator, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1AFE can be caused by a faulty drive motor generator.
  • It can also be caused by an open or shorted drive motor generator harness.
  • Additionally, a poor electrical connection in the drive motor generator circuit can also trigger this fault code.

To fix the p1afe automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p1afe, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1AFE has an estimated repair time of 1.0 hour. The cost of fixing this code can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. These factors can influence the overall cost of diagnosing and fixing the P1AFE fault code.

The P1AFE code indicates a problem with the Drive Motor 2 Control Module.

The Drive Motor Generator Power Inverter Control Module contains two Motor Control Modules and the Hybrid Powertrain Control Module. Each MCM controls the speed, direction, and output torque of its respective drive motor generator through the sequencing actuation of high current switching transistors called insulated gate bipolar transistors.

The MCM monitors the phase current sensors for minimal current to ensure the drive motor phase circuits are functioning properly.

What are the possible causes of the P1AFE automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1AFE fault code. This code is usually caused by a faulty drive motor generator, an open or shorted drive motor generator harness, or a poor electrical connection in the drive motor generator circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1AFE fault code?

If you’re experiencing the P1AFE fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Drive Motor Generator or an open or shorted Drive Motor Generator harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to resolve the problem.

What are the specific steps I can take to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the P1AFE fault code?

If you’re experiencing the P1AFE fault code, start by checking the possible causes: a faulty drive motor generator, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors, looking for damaged components and broken, bent, pushed out, or corroded connector pins. This will help you identify the issue and take the necessary steps to fix it.

p1afe error fault code explained

If your engine light is on, it could be due to a faulty drive motor generator, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top