The P1AEF automobile fault code indicates a problem with the Drive Motor Generator Power Inverter Module, which can cause the engine light to turn on. The cause of this issue could be a faulty module, an open or shorted harness, or a poor electrical connection.

It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1aef fault code.

Here are the symptoms to look out for:

  • The P1AEF fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1AEF fault code can be caused by a faulty drive motor generator power inverter module or poor electrical connections.

  • The automobile fault code P1AEF can be caused by a faulty Drive Motor Generator Power Inverter Module.
  • It can also be caused by an open or shorted harness in the Drive Motor Generator Power Inverter Module.
  • Additionally, a poor electrical connection in the Drive Motor Generator Power Inverter Module circuit can also trigger this fault code.

To fix the p1aef automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code p1aef, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1AEF is a diagnostic trouble code related to the hybrid battery pack. The code indicates that there is an issue with the battery pack’s cooling system.

The estimated repair time for this issue is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.

Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

The P1AEF code is related to the Drive Motor Generator Power Inverter Control Module in automobiles. This module contains two motor control modules that measure hybrid battery high voltage with several internal sensors.

The P1AEF code specifically indicates an issue with Drive Motor 2 Control Module Hybrid Battery System Voltage being too high. The battery energy control module also monitors high voltage with several internal sensors and broadcasts the measurement over serial data.

What are the possible causes of the P1AEF fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P1AEF fault code. This code is usually caused by a faulty Drive Motor Generator Power Inverter Module or an open or shorted harness. It can also be caused by a poor electrical connection in the Drive Motor Generator Power Inverter Module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Drive Motor Generator Power Inverter Module?

If you’re experiencing an Engine Light ON (or Service Engine Soon Warning Light), it could be due to a faulty Drive Motor Generator Power Inverter Module or an open or shorted harness. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify the root cause of the problem and take the necessary steps to fix it.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P1AEF fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P1AEF fault code, you should visually inspect the related wiring harness and connectors. This will help you identify the cause of the problem and determine the appropriate fix. Checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins is an important step in the process, as it can help you identify any issues that may be contributing to the fault code.

p1aef error fault code explained

If your engine light is on, it could be due to a faulty Drive Motor Generator Power Inverter Module or related wiring issues.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Scroll to Top