The P1AED automobile fault code indicates a problem with the Drive Motor Generator Power Inverter Module, which can cause the engine light to turn on.

The cause of this issue could be a faulty harness, open or shorted circuit, or poor electrical connection. It is important to address this issue promptly as it can affect the performance of the vehicle.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1aed fault code. Here are the symptoms to look out for:

  • The P1AED fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, and there may be a noticeable decrease in overall performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

P1AED fault code can be caused by a faulty harness, poor electrical connection, or a malfunctioning Drive Motor Generator Power Inverter Module.

  • The automobile fault code P1AED can be caused by a faulty harness that is open or shorted.
  • It can also be caused by a circuit with poor electrical connection.
  • Another cause of this fault code is a faulty Drive Motor Generator Power Inverter Module.
  • Additionally, a Drive Motor Generator Power Inverter Module harness that is open or shorted can also trigger this fault code.
  • Lastly, a circuit with poor electrical connection in the Drive Motor Generator Power Inverter Module can also cause the P1AED fault code.

To fix the p1aed automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1aed, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1AED has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of P1AED will be between $75 and $150, depending on the repair time.

The P1AED code is related to the Drive Motor Generator Power Inverter Control Module in hybrid vehicles. This code indicates a problem with the Drive Motor 2 Control Module in the hybrid battery system voltage.

The Drive Motor 2 Control Module measures the high voltage of the hybrid battery with internal sensors. The battery energy control module also monitors high voltage with internal sensors and broadcasts the measurement over serial data. If you encounter the P1AED code, it is recommended to have a professional mechanic diagnose and repair the issue to ensure proper functioning of the hybrid vehicle.

What are the possible causes of the P1AED fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1AED fault code. This code is caused by a faulty harness that is open or shorted, a poor electrical connection, or a faulty drive motor generator power inverter module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1AED fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P1AED fault code, there are a few things you can do to fix it. First, check the possible causes listed above. Then, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the wiring and connectors and allow you to fix the problem.

What are the damaged components that I should look for when fixing the P1AED fault code?

If you’re dealing with a P1AED fault code, you may notice that your engine light is on. This could be due to a faulty harness that is open or shorted, or a poor electrical connection. Another possible cause is a faulty Drive Motor Generator Power Inverter Module, which could also have an open or shorted harness or poor electrical connection. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components, such as broken, bent, pushed out, or corroded connector pins.

p1aed error fault code explained

If your engine light is on, it could be due to a faulty harness, poor electrical connection, or a faulty drive motor generator power inverter module.

Check for damaged components and inspect the wiring harness and connectors for any issues. Look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top