The P1AE1 automobile fault code indicates a problem with the Drive Motor Generator Power Inverter Control Module, which can cause the engine light to turn on.
The possible causes include a faulty module, an open or shorted harness, or poor electrical connections. It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated at 1.0, and it is crucial to address the problem promptly to avoid further damage to the vehicle.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1Ae1: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1ae1 fault code. Here are the symptoms to look out for:
- The P1AE1 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P1Ae1: Common Causes Of This Fault Code
The P1AE1 fault code can be caused by a faulty control module, open harness, or poor electrical connection.
- The automobile fault code P1AE1 can be caused by a faulty Drive Motor Generator Power Inverter Control Module.
- It can also be caused by an open or shorted Drive Motor Generator Power Inverter Control Module harness.
- Additionally, a poor electrical connection in the Drive Motor Generator Power Inverter Control Module circuit can also trigger this fault code.
Fix Code P1Ae1: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p1ae1, including inspecting wiring harness, connectors, and damaged components.
- To fix the automobile fault code P1AE1, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1Ae1: Affordable Fix For Complex Automobiles
The factors that influence the cost of diagnosing and fixing the P1AE1 automobile fault code are: – The estimated repair time is 1.0 hour.
– Auto repair shops typically charge between $75 and $150 per hour.
– The cost may vary depending on the location and reputation of the repair shop. – The cost may also depend on the severity of the issue causing the fault code.
– Additional parts or labor may be required, which can increase the cost.
P1Ae1: Your Car’s Battery Is In Trouble
The P1AE1 code is related to the Drive Motor Generator Power Inverter Control Module.
This module contains three motor control modules and the hybrid powertrain control module. The code indicates that there is a problem with the Drive Motor 2 Control Module System Voltage, which is reading as too high.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1AE1 fault code. This code is caused by a faulty drive motor generator power inverter control module, an open or shorted harness, or poor electrical connection in the control module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1AE1 fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to fix it. The cause of this issue could be a faulty drive motor generator power inverter control module, an open or shorted harness, or a poor electrical connection. To address this, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re fixing the P1AE1 fault code, look out for the engine light or service engine soon warning light turning on. This is usually caused by a faulty drive motor generator power inverter control module, an open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors, and check for damaged components such as broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on, it could be due to a faulty Drive Motor Generator Power Inverter Control Module or related wiring issues. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.
