If you see the engine light on or the service engine soon warning light, it could be due to the P1ADD fault code.

This code indicates a problem with the Power Inverter Module (PIM) or its related wiring harness and connectors.

The cause could be a faulty PIM, an open or shorted PIM harness, or a poor electrical connection in the PIM circuit. It’s important to address this issue promptly as it can affect the performance of your vehicle. The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1add fault code. Here are some symptoms to look out for:

  • The P1ADD fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, engine stalling, rough idling, and decreased fuel efficiency.
  • Additionally, the vehicle may experience difficulty starting, misfires, or hesitation during acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1ADD automobile fault code can be caused by a faulty Power Inverter Module (PIM), an open or shorted PIM harness, or poor electrical connection in the PIM circuit.

  • The automobile fault code P1ADD can be caused by a faulty Power Inverter Module (PIM).
  • It can also be caused by an open or shorted Power Inverter Module (PIM) harness.
  • Additionally, a poor electrical connection in the Power Inverter Module (PIM) circuit can also trigger this fault code.

To fix the p1add automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1add, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The P1ADD fault code is related to the airfuel ratio sensor circuit.

The factors that can cause this code include a faulty sensor, damaged wiring, or a malfunctioning engine control module. The estimated repair time for this fault code is 1.0 hour, and the cost can range from $75 to $150 per hour depending on the auto repair shop. It is important to address this issue promptly to avoid further damage to the vehicle and ensure optimal performance.

The P1ADD fault code is related to the drive motor control modules in the Power Inverter Module. These modules are not serviced separately and are internal to the Power Inverter Module. The fault is detected when the Power Inverter Module identifies an internal malfunction or when a service module is installed but not programmed.

The code specifically refers to the Long Term Memory Performance of Drive Motor 2 Control Module.

What is the possible cause of the P1ADD fault code in an automobile?

If you see the engine light on or the service engine soon warning light, it could be due to the P1ADD fault code. This fault code is usually caused by a faulty Power Inverter Module (PIM), an open or shorted PIM harness, or a poor electrical connection in the PIM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the P1ADD fault code in an automobile?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light with a P1ADD fault code, it’s likely due to a faulty Power Inverter Module (PIM), an open or shorted PIM harness, or poor electrical connection in the PIM circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.

What are the symptoms of the P1ADD fault code in an automobile?

The P1ADD fault code in an automobile is indicated by the Engine Light ON or Service Engine Soon Warning Light. The cause of this fault code is a faulty Power Inverter Module (PIM), an open or shorted PIM harness, or a poor electrical connection in the PIM circuit. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

p1add error fault code explained

If your engine light is on, it could be due to a faulty Power Inverter Module (PIM), an open or shorted PIM harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins, and inspect components.

Scroll to Top