The P1A96 automobile fault code indicates a problem with the StarterGenerator Control Module (SGCM), which can trigger the Engine Light ON or Service Engine Soon Warning Light.
The cause of this issue could be a faulty SGCM, an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit.
The importance of repairing this fault code lies in the fact that it can affect the performance of the vehicle’s electrical system. The difficulty level of fixing this issue is moderate, and it can take up to 1.0 hour to repair.
To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1A96: Uncovering The Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1a96 fault code. Here are the symptoms to look out for:
- The P1A96 fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
- Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1A96: Common Causes Of The Fault Code
The P1A96 automobile fault code can be caused by various factors, including a faulty SGCM or poor electrical connection.
- The automobile fault code P1A96 can be caused by a faulty Starter/Generator Control Module (SGCM).
- It can also be caused by an open or shorted SGCM harness.
- Additionally, a poor electrical connection in the SGCM circuit can also trigger this fault code.
Fix Code P1A96: Simple Steps To Get Your Car Running
To fix the p1a96 automobile fault code, check the possible causes and inspect related components for damage or corrosion.
- To fix the automobile fault code p1a96, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: P1A96 Repair Cost & Complexity
The factors that influence the cost of diagnosing and fixing the automobile fault code P1A96 are the estimated repair time and the hourly rate charged by the auto repair shop. The estimated repair time for this fault code is 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour.
These factors should be considered when estimating the cost of diagnosing and fixing the P1A96 fault code.
P1A96: Your Car’s Battery Is Draining – Here’s Why
The P1A96 fault code refers to the Accessory Power Module (APM) in the StarterGenerator Control Module (SGCM). The APM controls the flow of energy between the 42 V DC and 14 V DC buses via a bi-directional converter.
When the APM Power Conversion direction is set to 42 V to 14 V, energy flows from the 42 V DC Bus to the 14 V DC Bus via the APM.
If the DCDC converter is stuck in the 42-14 Vol direction, the P1A96 code will be triggered.
FAQ
If you see the engine light on or the service engine soon warning light in your automobile, it could be due to the P1A96 fault code. This code is caused by a faulty Starter/Generator Control Module (SGCM), an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If the engine light is on due to a faulty Starter/Generator Control Module (SGCM), it is important to visually inspect the related wiring harness and connectors. Check for any damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This could be caused by an open or shorted harness or a poor electrical connection in the SGCM circuit. To fix the issue, check the possible causes listed above and address any issues found during the visual inspection.
Ignoring the P1A96 fault code in an automobile, which indicates a faulty Starter/Generator Control Module (SGCM), can lead to serious consequences. The engine light will remain on, and the vehicle may not start or may stall while driving. It is crucial to inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins to fix the issue.
Wrap Up
If your engine light is on, it could be due to a faulty StarterGenerator Control Module (SGCM), an open or shorted SGCM harness, or a poor electrical connection in the SGCM circuit.
To fix the issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
