[SOLVED] P1A6C Code: How To Fix Sgcm Service Calibration Fault

If you see the engine light on or the service engine soon warning light, it could be due to the P1A6C fault code. This code indicates a problem with the Starter Generator Control Module (SGCM) program, faulty SGCM, or poor electrical connection in the SGCM circuit.

It is important to address this issue promptly as it can affect the performance of your vehicle. The repair time for this fault code is estimated to be around 1.0 hour. To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

P1A6C: Uncovering The Symptoms Of This Auto Fault Code

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1a6c fault code. Here are the symptoms to look out for:

• The P1A6C fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
• Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
• Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
• It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

Decoding P1A6C: Common Causes Of This Fault Code

The P1A6C fault code in automobiles can be caused by various factors, including issues with the Starter Generator Control Module (SGCM) program, faulty SGCM, open or shorted SGCM harness, and poor electrical connection in SGCM circuit.

• The automobile fault code P1A6C can be caused by various factors.
• These include a faulty Starter Generator Control Module (SGCM), an open or shorted SGCM harness, a poor electrical connection in the SGCM circuit, and issues with the SGCM program.
• It is important to identify the root cause of the fault code to ensure proper diagnosis and repair.

Fix Code P1A6C: Simple Steps To Get Your Car Running

To fix the p1a6c automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

• To fix the automobile fault code p1a6c, first, check the possible causes listed above.
• Then, visually inspect the related wiring harness and connectors.
• Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
• This fix will take an estimated repair time of 1.0 hour.

Crunching The Numbers: P1A6C Fixing Cost & Complexity

The fault code is P1A6C. The estimated repair time is 1.0 hour.

The cost of fixing the fault code depends on the repair time.

Most auto repair shops charge between $75 and $150 per hour. These factors are influential in determining the cost of fixing the fault code.

P1A6C: Understanding The Hybrid/Ev Battery Charge System Fault

The P1A6C fault code is related to the Starter Generator Control Module (SGCM) in an automobile. This fault code indicates that there is a service calibration fault in the SGCM. The internal fault detection is handled inside the control module, and no external circuits are involved.

This fault code also suggests that the Energy Storage Control Module (ESCM) or Heating Control Module (HCM) has not yet been programmed with the latest production software. To fix this issue, the SGCM needs to be serviced and calibrated properly.

FAQ

Wrap Up

If your engine light is on, it could be due to a faulty Starter Generator Control Module (SGCM) program, harness, or circuit connection. Visually inspect the wiring and connectors for damage or corrosion.

Check for broken or bent pins.

Resources

• Resource 1
• Resource 2
• Resource 3
• Resource 4