The P1A4C fault code in automobiles indicates a problem with the Hybrid Battery Current Sensor.

The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty sensor, an open or shorted harness, or a poor electrical connection. It is important to address this problem promptly as it can lead to reduced fuel efficiency and performance.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is moderate, and it takes approximately 1.0 hour to fix.

To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related components.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1a4c fault code. Here are the symptoms to look out for:

  • The P1A4C fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, and difficulty starting the engine.
  • Additionally, the vehicle may experience rough idling or stalling, and there may be a noticeable decrease in acceleration.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1A4C fault code can be caused by a faulty sensor, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1A4C can be caused by a faulty hybrid battery current sensor.
  • It can also be caused by an open or shorted hybrid battery current sensor harness.
  • Additionally, a poor electrical connection in the hybrid battery current sensor circuit can also trigger this fault code.

To fix the p1a4c automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1a4c, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1A4C has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of P1A4C will be between $75 and $150, depending on the repair time required.

The P1A4C code refers to the Hybrid Battery Current Sensor Performa. It is a current sensor based on the closed-loop principle. It uses a soft-magnetic probe as a field detector of the primary current magnetic field.

Compared to standard sensors with Hall-probes, it offers low offset currents, small temperature dependence, and no long term drift of offset current. It also has small offset current forces and a compact size. Separate electronics are available for this code.

What are the possible causes of the P1A4C automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1A4C fault code. This code is usually caused by a faulty hybrid battery current sensor, an open or shorted hybrid battery current sensor harness, or a poor electrical connection in the hybrid battery current sensor circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can the Hybrid Battery Current Sensor be checked for faults?

If the engine light is on, it could be due to a faulty Hybrid Battery Current Sensor, an open or shorted harness, or poor electrical connection. To check for faults, inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, or pushed out connector pins. This will help identify the issue and determine the necessary fix.

What steps should be taken to visually inspect the wiring harness and connectors related to the P1A4C fault code?

If you’re experiencing the P1A4C fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you should check for a faulty Hybrid Battery Current Sensor, an open or shorted Hybrid Battery Current Sensor harness, or a poor electrical connection in the Hybrid Battery Current Sensor circuit. To fix this issue, visually inspect the related wiring harness and connectors for any damaged components, broken, bent, pushed out, or corroded connector’s pins.

p1a4c error fault code explained

If your engine light is on, it could be due to a faulty hybrid battery current sensor, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out pins.

Scroll to Top