The P1A2A automobile fault code indicates a problem with the Energy Storage Box (ESB) Battery or the Battery Energy Control Module (BECM). The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this fault code could be a faulty ESB battery, BECM, or a poor electrical connection in the BECM circuit.

The repair importance is high as it affects the performance of the vehicle.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time is estimated to be around 1.0 hour. To interpret the fault code, check the “Possible Causes” listed above and look for any damaged components or poor electrical connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of p1a2a fault code.

Here are the symptoms to look out for:

  • The P1A2A fault code in automobiles can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience a decrease in acceleration or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The P1A2A automobile fault code can be caused by a faulty ESB battery, BECM module, harness, or electrical connection.

  • The automobile fault code P1A2A can be caused by a faulty Energy Storage Box (ESB) Battery.
  • It can also be caused by a faulty Battery Energy Control Module (BECM).
  • Another cause of this fault code is an open or shorted harness in the Battery Energy Control Module (BECM).
  • Lastly, a poor electrical connection in the Battery Energy Control Module (BECM) circuit can also cause this fault code.

To fix the p1a2a automobile fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p1a2a, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P1A2A has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the total cost of fixing the P1A2A fault code will depend on the hourly rate charged by the repair shop and the estimated repair time.

The P1A2A code is related to the Hybrid Battery 2 Circuit High Voltage. Battery voltage sensors are used to monitor the voltage of the batteries in the Energy Storage Box (ESB). The ESCM monitors the voltage drop across the battery voltage sensors and uses the inputs for hybrid calculations.

When the battery voltage is high, the resistances of the sensors are high and the voltage signals are high.

When the battery voltage is low, the resistances of the sensors are low and the voltage signals are low.

What are the possible causes of the P1A2A automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1A2A fault code. This code is usually caused by a faulty Energy Storage Box (ESB) battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I fix the P1A2A automobile fault code?

If you’re experiencing the P1A2A fault code, which is indicated by the engine light or service engine soon warning light being on, it may be due to a faulty Energy Storage Box (ESB) battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What should I visually inspect to diagnose the P1A2A automobile fault code?

If you’re experiencing the P1A2A fault code, you may notice that your engine light is on. This could be due to a faulty Energy Storage Box (ESB) battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To diagnose the issue, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Check the “Possible Causes” listed above for further guidance.

p1a2a error fault code explained

If your engine light is on, it could be due to a faulty Energy Storage Box (ESB) Battery, Battery Energy Control Module (BECM), or related wiring issues. Visually inspect the wiring harness and connectors for damage, and check for broken or corroded pins.

Scroll to Top