The P1A24 automobile fault code indicates a problem with the Energy Storage Box (ESB) Battery or the Battery Energy Control Module (BECM). The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this issue could be a faulty ESB battery, BECM, or a poor electrical connection in the BECM circuit.

The repair importance is high as it affects the vehicle’s performance and fuel efficiency.

The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion. The fault code can be interpreted using an OBD-II scanner.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1a24 fault code.

Here are the symptoms to look out for:

  • The P1A24 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, reduced engine power, poor acceleration, engine stalling, rough idling, decreased fuel efficiency, and difficulty starting the engine.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1A24 fault code in automobiles can be caused by a faulty ESB battery, BECM module, harness, or electrical connection.

  • The automobile fault code P1A24 can be caused by a faulty Energy Storage Box (ESB) Battery.
  • It can also be caused by a faulty Battery Energy Control Module (BECM).
  • Another cause of this fault code is when the Battery Energy Control Module (BECM) harness is open or shorted.
  • Lastly, a poor electrical connection in the Battery Energy Control Module (BECM) circuit can also cause this fault code.

Below are some possible fixes for the automobile fault code p1a24, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code p1a24, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1A24 include the estimated repair time, which is 1.0 hour. Most auto repair shops charge between $75 and $150 per hour for their services.

These costs can vary depending on the location of the repair shop, the experience of the mechanic, and the type of vehicle being serviced. It is important to consider all of these factors when determining the overall cost of diagnosing and fixing the P1A24 fault code.

The P1A24 code is related to the voltage of Hybrid Battery 1. Battery voltage sensors are used to monitor the voltage of the batteries in the Energy Storage Box (ESB). The ESCM monitors the voltage drop across the battery voltage sensors and uses the inputs for hybrid calculations.

When the battery voltage is high, the resistances of the sensors are high and the voltage signals are high.

When the battery voltage is low, the resistances of the sensors are low and the voltage signals are low.

What are the possible causes of the P1A24 fault code in an automobile?

If your automobile’s engine light is on and you’re seeing the P1A24 fault code, it could be due to a faulty Energy Storage Box (ESB) Battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.

How can one visually inspect the related wiring harness and connectors to fix the P1A24 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the P1A24 fault code, there are a few possible causes to consider. These include a faulty Energy Storage Box (ESB) Battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To fix the issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the symptoms of the P1A24 fault code in an automobile?

The P1A24 fault code in an automobile is indicated by the Engine Light ON (or Service Engine Soon Warning Light). The possible causes of this fault code are a faulty Energy Storage Box (ESB) Battery, a faulty Battery Energy Control Module (BECM), an open or shorted BECM harness, or a poor electrical connection in the BECM circuit. To fix this issue, one should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components and broken, bent, pushed out, or corroded connector’s pins.

p1a24 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the fault code P1A24, check the Energy Storage Box (ESB) Battery, Battery Energy Control Module (BECM), and related wiring harness and connectors for any damage or poor electrical connection. Inspect the components and connector pins carefully.

Scroll to Top