If you see the engine light on or the service engine soon warning light, it could be due to the P1951 fault code. This code indicates a problem with the Radiator Fan 2, such as a faulty fan or a poor electrical connection in the circuit.

It’s important to address this issue promptly to prevent overheating and potential engine damage. The repair time for this fault code is estimated at 1.0, and the fix involves visually inspecting the wiring harness and connectors for damage or corrosion. To interpret the fault code, check the “Possible Causes” listed above and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1951 fault code.

Here are the symptoms to look out for:

  • The P1951 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light, decreased fuel efficiency, engine misfires, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience reduced power and acceleration, and the transmission may shift roughly or erratically.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

P1951 fault code can be caused by a faulty radiator fan, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1951 can be caused by a faulty Radiator Fan 2.
  • It can also be caused by an open or shorted Radiator Fan 2 harness.
  • Additionally, a poor electrical connection in the Radiator Fan 2 circuit can also trigger this fault code.

Below are the possible fixes for the automobile fault code p1951, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code P1951, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code is P1951.

The estimated repair time is 1.0 hour. The cost of fixing the fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour.

Therefore, the fixing cost of P1951 will be between $75 and $150.

The P1951 code is a generic description for Radiator Fan 2 Movement Restricted Jammed. However, the manufacturer may have a different description for your specific vehicle. Unfortunately, we do not have any further information about this OBDII code at this time.

If you have any questions or concerns, please feel free to post them in the comments section below for more information.

What are the possible causes of the P1951 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1951 fault code. This code is usually caused by a faulty Radiator Fan 2, an open or shorted Radiator Fan 2 harness, or a poor electrical connection in the Radiator Fan 2 circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Radiator Fan 2?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a faulty Radiator Fan 2, you can visually inspect the related wiring harness and connectors to fix the issue. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the Radiator Fan 2 harness is open or shorted, or if there is a poor electrical connection in the circuit.

What are the steps to take if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection, follow these steps. First, check the “Possible Causes” listed above. Then, visually inspect the related wiring harness and connectors. Finally, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you fix the issue of the Engine Light ON (or Service Engine Soon Warning Light) caused by a faulty Radiator Fan 2, Radiator Fan 2 harness being open or shorted, or Radiator Fan 2 circuit having a poor electrical connection.

p1951 error fault code explained

If your engine light is on, it could be due to a faulty Radiator Fan 2, an open or shorted harness, or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top