The P1928 fault code in automobiles indicates a problem with the Fuel Additive Level Pump. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.
The cause of this issue could be a faulty Fuel Additive Level Pump, an open or shorted harness, or a poor electrical connection in the Fuel Additive Level Pump circuit. It is important to address this issue promptly as it can lead to decreased fuel efficiency and engine performance. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1928: Uncovering The Symptoms Of This Auto Fault Code
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1928 fault code. Here are the symptoms to look out for:
- The P1928 fault code in an automobile can cause several symptoms.
- The most common symptom is the illumination of the engine light or service engine soon warning light.
- Other symptoms include a decrease in engine power, poor acceleration, rough idling, stalling, and difficulty starting the engine.
- Additionally, the vehicle may experience transmission shifting problems, reduced fuel efficiency, and increased emissions.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P1928: Common Causes Of The Fault Code
The automobile fault code P1928 can be caused by a faulty fuel additive level pump, open or shorted harness, or poor electrical connection.
- The automobile fault code P1928 can be caused by a faulty fuel additive level pump.
- It can also be caused by an open or shorted harness of the fuel additive level pump.
- Additionally, a poor electrical connection in the fuel additive level pump circuit can also trigger this fault code.
Fix P1928: Simple Steps To Get Your Car Running Again
To fix the automobile fault code p1928, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code P1928, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P1928: Affordable Fix For Complex Automobiles
The fault code P1928 indicates an issue with the engine coolant temperature sensor circuit. The estimated repair time for this fault is 1.0 hour.
The cost of fixing this fault will depend on the hourly rate charged by the auto repair shop. Most shops charge between $75 and $150 per hour for repairs.
Therefore, the cost of fixing the P1928 fault code will likely be between $75 and $150.
P1928: Your Car’s Fuel Injector Circuit Low – What To Do?
The P1928 code is a generic description for Fuel Additive Level Pump Control CircuitOpen.
However, the manufacturer may have a different description for your specific vehicle model and year.
Unfortunately, we do not have any additional information about this code at this time. If you have any questions or concerns, please feel free to post them in the comments section below for more information.
FAQ
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P1928 fault code. This code is usually caused by a faulty Fuel Additive Level Pump, an open or shorted Fuel Additive Level Pump harness, or a poor electrical connection in the Fuel Additive Level Pump circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1928 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. Firstly, check for a faulty fuel additive level pump or a poor electrical connection in the fuel additive level pump circuit. To do this, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
Ignoring the P1928 fault code, which indicates a faulty fuel additive level pump or related wiring issues, can lead to serious consequences such as reduced fuel efficiency, engine misfires, and even engine damage. It is important to address the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and fixing any issues found.
Wrap Up
If your engine light is on, it could be due to a faulty fuel additive level pump, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage, broken or corroded pins, and other issues.
Check the possible causes listed above for a fix.
