The P1924 fault code in automobiles indicates a problem with the fuel additive level.

The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue could be a faulty fuel additive level, an open or shorted fuel additive level harness, or a poor electrical connection in the fuel additive level circuit.

It is important to address this issue promptly as it can lead to decreased fuel efficiency and engine performance. The repair difficulty is moderate, with a repair time of approximately 1.0 hour. To fix the problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the p1924 fault code.

Here are the symptoms to look out for:

  • The P1924 fault code in an automobile can cause several symptoms.
  • The most common symptom is the illumination of the engine light or service engine soon warning light.
  • Other symptoms include a decrease in engine power, poor acceleration, and rough idling.
  • The vehicle may also experience stalling or difficulty starting.
  • Additionally, there may be transmission shifting issues, such as harsh shifting or failure to shift.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code P1924 can be caused by various issues related to the fuel additive level.

  • The automobile fault code P1924 can be caused by a faulty fuel additive level.
  • It can also be caused by an open or shorted fuel additive level harness.
  • Additionally, a poor electrical connection in the fuel additive level circuit can also trigger this fault code.

To fix the automobile fault code p1924, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P1924, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1924 indicates an issue with the engine’s fuel system. The diagnosis and fixing cost depend on the estimated repair time, which is 1.0 hour.

Most auto repair shops charge between $75 and $150 per hour, which is an influential factor in determining the total cost. Other factors that may affect the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

It is important to get a detailed estimate from the repair shop before proceeding with any repairs.

The P1924 code is related to the fuel additive level circuit. It indicates that the circuit is reading a low level of fuel additive. This code is a generic description, and the manufacturer may have a different description for your specific vehicle.

Unfortunately, we do not have any further information about this code at this time.

If you have any questions or concerns, please feel free to post them in the comments section below.

What are the possible causes of the P1924 automobile fault code?

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P1924 fault code. This code is usually caused by a faulty Fuel Additive Level, an open or shorted Fuel Additive Level harness, or a poor electrical connection in the Fuel Additive Level circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1924 fault code?

If you’re experiencing the P1924 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can fix it by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code is caused by a faulty Fuel Additive Level, Fuel Additive Level harness that is open or shorted, or Fuel Additive Level circuit poor electrical connection.

What are the consequences of ignoring the P1924 fault code and not fixing it in a timely manner?

Ignoring the P1924 fault code, which indicates a faulty fuel additive level or poor electrical connection, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle’s performance may be affected. It is important to fix the issue promptly by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.

p1924 error fault code explained

If your engine light is on and you have a P1924 fault code, it could be due to a faulty fuel additive level, an open or shorted fuel additive level harness, or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion and check for broken or bent pins.

Scroll to Top